Buyer's guide
Engine TBO when buying an aircraft: hours, the 12-year limit and what changes in Europe
Published 16 November 2026.
"Hours to TBO" is often the biggest number in a used piston aircraft's price after the airframe itself. TBO, time between overhaul, has two limits: operating hours and calendar years, and the one reached first counts. Lycoming revised its TBO schedule in July 2026, and the EU maintenance rule for light aircraft treats TBO as a recommendation that can be handled in the maintenance programme. Below is what the manufacturer's document and the EU rule say, and how we read an engine when we price an aircraft.
Two limits: hours and years
Lycoming's Service Instruction 1009BF, of 20 July 2026, sets both for every Lycoming engine model:1
- Calendar. All models are to be overhauled within 12 years of first entering service or of the last overhaul. The reason given is deterioration with age: corrosion of metal parts and degradation of gaskets, seals, flexible hoses and fuel pump diaphragms.
- Hours. Each model has an operating-hour TBO in the instruction's tables, to cover wear and fatigue from normal operation.
The instruction adds that local climate, storage, long periods of inactivity and oil change frequency can reduce the calendar TBO, and that on-condition inspection by the operator is mandatory to assess the engine's health.1
What changed in July 2026
The 1009BF revision split the hour tables into two columns: one for the first run of a factory-new or factory-rebuilt engine, and one for engines overhauled by Lycoming or by another shop.1 For engines common in training and touring aircraft:
| Engine | Factory new or rebuilt | After an overhaul |
|---|---|---|
| O-360 (except O-360-E) | 2,600 h | 2,000 h |
| IO-360-L2A | 2,600 h | 2,000 h |
| O-320 (except O-320-H) | 2,600 h | 2,000 h |
The notes allow adjustments. An engine in frequent use, at least 120 hours in every rolling 90 days and no 30-day period below 20 hours, adds 200 hours. A Lycoming factory overhaul, or a field overhaul that meets the listed conditions, can add another 200 hours.1 The extensions do not apply to engines with non-genuine parts or unapproved procedures, and propellers and accessories keep their own overhaul schedules.1
So 1,500 hours on an O-360 can leave 1,100 hours if the engine is still on its factory first run, or 500 if it has been overhauled since. Ask which column applies.
Passing the 12 years
Lycoming's instruction itself foresees it for non-commercial operation, naming EASA Part-NCO: a qualified maintenance person can allow the 12 years to be exceeded, with the concurrence of the civil aviation authority, after examining the engine for corrosion and degradation and finding it airworthy. That examination is repeated annually or as needed.1
The EU rule for light aircraft, Part-ML, is consistent with that. It names TBO intervals among the maintenance recommendations issued through service bulletins, service letters and other non-mandatory service information. An aircraft can do without a declared or approved maintenance programme document only if those recommendations, TBO included, are followed without deviation.2 In other words, a deviation from the recommended TBO is handled through the aircraft maintenance programme, declared by the owner or approved by the organisation managing the aircraft. Mandatory items, such as airworthiness directives, the airworthiness limitations and requirements in the type certificate data sheet, are not part of that choice.2
For a buyer, an engine "on condition" past its TBO is not illegal by definition, but it changes the price and often the insurance. Ask to see the maintenance programme and the inspection records that justify it.
How we read an engine when we price an aircraft
This part is our reading as brokers.
- Which limit comes first. A private aircraft that flies 100 hours a year reaches 12 years long before the hours. On the 2018 Diamond DA42-VI in our inventory, the maintenance status shows the original left engine with 1,176 hours available but a limit in August 2030: the date arrives first.
- Time since what. "Since new", "since overhaul" and "since factory rebuild" are not interchangeable, and with the 2026 tables the difference is worth hundreds of hours.
- Who did the last overhaul, with which parts, and the paperwork for it.
- How regularly the engine flew. Long periods on the ground count against the calendar side, as the instruction says.
- Any event that resets the clock. A propeller strike usually means an inspection or a replacement, as explained in our prop strike post.
The Lycoming-powered aircraft in our inventory, such as the Piper Seminole, the Piper Archer and the Cessna 172 SP, are all read this way before we talk price.
Frequently asked questions
What is TBO?
Time between overhaul: the interval, in operating hours and in calendar years, after which the engine manufacturer recommends an overhaul. For Lycoming engines, the calendar limit is 12 years and the hour limit depends on the model.
What is the TBO of a Lycoming O-360 after the 2026 revision?
2,600 hours for the first run of a factory-new or factory-rebuilt engine and 2,000 hours after an overhaul, with possible 200-hour additions under the conditions in the instruction. O-360-E engines have a different figure.
Can an engine fly past its TBO in Europe?
Under Part-ML, TBO is a non-mandatory recommendation, and a deviation is handled in the aircraft maintenance programme. Airworthiness directives and other mandatory requirements still apply. For passing the 12 years, Lycoming's instruction requires an examination by a qualified maintenance person with the authority's concurrence.
Does an engine past TBO lower the price?
Usually yes, because the buyer prices in the overhaul or exchange. How much depends on the engine and the market, which is why the hours and the dates matter as much as the airframe.
Sources
- Lycoming Engines, Service Instruction No. 1009BF, "Time Between Overhaul (TBO) Schedules", 20 July 2026: lycoming.com
- Regulation (EU) No 1321/2014, consolidated text of 07/08/2026, Annex Vb (Part-ML), point ML.A.302: eur-lex.europa.eu